[RE] [질문]Network Setting 방법
Reg. Date: March 22, 2004 By 유창모
답변이 늦어 죄송합니다.
제가 cisco 장비에 대해서 잘 몰라 확신은 없지만요....
cisco web site에서 찾아 보니 다음과 같은 글이 있습니다.
http://www.cisco.com/en/US/products/hw/switches/ps663/prod_release_note09186a0080144e6f.html
Unsupported Features
These are some of the features that are not supported in Cisco IOS Release 12.1(14)E1 for the Catalyst 4000 family switch:
Bridge groups
EtherChannel DHCP snooping
DHCP snooping on private VLANs
IOS software-based transparent bridging (also called "fallback bridging")
Secure access via secure shell (SSH)
Access control using authorization and accounting
Kerberos support for access control
HTTP server
Community VLANs and two-way community VLANs in private VLANs
VLAN Management Policy Server (VMPS) client or server
Remote SPAN (RSPAN)
Port security
WS-X4232-L3
WS-X4604-GWY
WS-G5483
Jumbo frames
IGMP v3 snooping
DLSw (Data-link switching)
WCCP (Web Cache Communication Protocol)
IEEE 802.3ad
PBR (policy-based routing) <- 지원 안되는군요 !!!!
The following ACL types:
Standard Xerox Network System (XNS) access list
Extended XNS access list
DECnet access list
Protocol type-code access list
>현재 사용하고 있는 장비는 Cisco Catalyst 4003 L3 Switch 장비 입니다.
>Backbone Switch로 사용하고있는데요
>이 장비에서 말씀해주신 내용이 적용이 가능한지요???
>
>>사용 또는 개발중인 장비가 어떤 것인지 잘 모르겠지만요...
>>이러한 기능을 Policy-based Routing이라 합니다.
>>원래 IP 장비는 destination IP address만을 참조하여 출력 포트(인터페이스)와 Next Hop MAC을 결정하게 되어 있습니다.
>>Policy-based Routing은 destination IP address 이외에도 굉장히 많은 필드를 참조하여 그 패킷의 출력 포트(인터페이스)와 Next Hop MAC을 결정할 수 있게 하는 기능입니다. "굉장히 많은 필드"란 Source IP, Protocol ID, Source/Destination Port Number in TCP/UDP 등이 될 것입니다.
>